Usb Operation; System Menu - SOUNDMASTER RCD1770 Manuel D'instructions

To clear a program
•
During program playing, press the
•
Open the CD door.
Note: USB program play is same operation.
1. Connect the USB device to the USB socket carefully.
2. Switch on the unit and select the USB source.
3. Press button to playback the music.
4. The operation procedures are the same as CD playback.
NOTE:
•
Compatible storage device (up to 32GB).
•
Please do NOT use a USB extension cable to connect your USB flash drive. Such cable
can pick up additional interference which can corrupt the data flow.
•
Always connect your USB flash drive directly to the USB port without USB extension cable.
•
Due to some USB drive manufacturer's non-compliance with the full USB 1.1/ 2.0 standard.
A small percentage (about 5%) of USB flash drive might not be compatible
There is a headphone output jack at the side of the unit. If headphones are connected to this
socket for private listening, the speakers will cut out automatically.
1. Turn on the device and switch to DAB + mode.
2. Press and hold the MENU button until "DRC" is shown in the display.
3. Press the Menu button repeatedly until "Language" is shown in the display.
4. Select with the
5. Press the SELECT button to confirm.
The display returns to the DAB display.
This system menu only operate in standby.
During standby mode, press "MENU" button to enter.
Press the oder
[Set Clock]: set the time clock by manual.
[SW VERSION]: This option will display the version number of the control software currently
installed in your radio. This will be helpful to a technician who is servicing this product.

USB OPERATION

HEADPHONES JACK
SELECT MENU LANGUAGE
button the language "German" or "English".
or

SYSTEM MENU

to select as below then press "SELECT" to enter.
/ INFO twice.
8
RCD1770 / English Instruction Manual