Publicité
975 Combo Roll Groover
Safety Symbols
In this operator's manual and on the product, safety symbols and signal words are used to communicate important safety
information. This section is provided to improve understanding of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
DANGER
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE indicates information that relates to the protection of property.
This symbol means read the operator's manual
carefully before using the equipment. The operator's
manual contains important information on the safe and
proper operation of the equipment.
This symbol means always wear safety glasses with
side shields or goggles when handling or using this
equipment to reduce the risk of eye injury.
This symbol indicates the risk of fingers and hands
being crushed between the groove rolls.
This symbol indicates the risk of hands, fingers,
legs, clothes and other objects catching and/or
wrapping on rotating shafts causing crushing or
striking injuries.
General Safety Rules
WARNING
Read and understand all instructions. Failure to
follow all instructions listed below may result in
electric shock, fire, and/or serious personal injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE!
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and by-standers away while opera-
ting a power. Distractions can cause you to lose
control.
2
This symbol indicates that a drill, impact tool, or
other power tool should not be used to drive this
device when used in place.
This symbol means always use a foot switch when
using the machine to reduce the risk of injury.
This symbol means wear a hard hat when working
overhead to reduce the risk of head injury.
This is information symbol and indicates the pro-
duct information available (including operators'
manual) by scanning the adjacent QR code.
• Keep floors dry and free of slippery materials
such as oil. Slippery floors invite accidents.
• Guard or barricade the area when work piece
extends beyond machine. A guard or barricade
that provides a minimum of three (3) feet clearance
around the work piece will reduce the risk of entan-
glement.
Electrical Safety
• Power tool plugs must match the outlet. Never
mod ify the plug in any way. Do not use any adap-
ter plugs with earthed (grounded) power tools.
Unmodi fied plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electrical shock
if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electrical shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
999-998-995.10_REV D
Publicité
