VOLTCRAFT PLC3000 Mode D'emploi page 28

• For installations in industrial facilities, follow the accident
prevention regulations for electrical systems and equipment
of the government safety organization or the corresponding
authority for your country.
• Do not operate the device immediately after transferring it
from a cold to a warm room. This can cause condensation
which may, under adverse circumstances, destroy the
device. Leave the device turned off until it has reached
room temperature.
• Do not overload the product. Observe the technical data.
• Only connect one device at a time with this product. Do
not connect more than one appliance for example by using
convenience receptacles.
• The power socket into which the device is inserted must be
easily accessible.
• Never pour any liquids over electrical devices or put objects
filled with liquid right next to the device. If liquid or an object
enters the interior of the device nevertheless, first power
down the respective socket (e.g. switch off circuit breaker)
and then pull the mains plug from the mains socket. Do not
operate the product anymore afterwards, but take it to a
specialist workshop.
• Never plug or unplug the appliance if your hands are wet.
• Do not cover the product during use.
28