Connecting To A Personal Computer - Brother P-Touch 9500PC Guide De Référence Rapide

Connecting to a personal computer

Connect the PT-9500PC to a personal computer using the included interface cables. The interface
cables used to connect to a USB port and a serial port are different.
®
Windows 95/NT4.0
Connect to serial port.
Note
●
Do not connect both the serial interface cable and USB interface cable to the PT-9500PC at the
same time. The PT-9500PC may malfunction.
Note
●
Do not connect the USB interface cable to a personal computer until the software has been installed.
●
If the USB interface cable is connected to a personal computer before the software is installed,
the following dialog box will appear. Click [Cancel], and then remove the USB interface cable.
16
®
Windows 98/98 SE/
Me/2000 Pro/XP
Advanced setup
Mac OS X 10.1-10.2.6
Basic setup
Connect to USB port.
Mac OS 8.6-9.x