Brother P-Touch 9500PC Guide De Référence Rapide page 62

9 Click [Install].
→ The dialog box to confirm the
installation appears.
To continue with installation, click
0
[Continue Installation].
→ Installation begins.
→ When installation is complete, the
message "Software was installed
correctly." appears.
a Click [Restart].
→ Installation of the printer driver is
complete, and the Macintosh will
restart.
After the Macintosh restarts, connect the
b
PT-9500PC to the Macintosh with the
USB interface cable, and then turn on the
PT-9500PC.
For details, refer to "Connecting to a
personal computer" ( → P.16).
61