Brother P-Touch 9500PC Guide De Référence Rapide page 44

7 Select the desired baud rate.
Click [Apply].
8
→ The baud rate will be changed.
9 Click [Close].
→ The Brother PT-9500PC Properties
sheet appears again.
0 Click [OK].
→ Setup is complete and the Brother
PT-9500PC Properties sheet will
close.
Note
●
When using a personal computer that
does not support a serial port baud rate of
115,200 bps, change the PT-9500PC
baud rate to 9,600 bps. For details, refer
to "Changing the baud rate" ( → P.101).
43