Installing The Paper Guide; Connecting To The Power Supply - Brother QL-560 Guide De L'utilisateur

10
Getting started

3 Installing the paper guide

Your QL-560 comes with a paper
guide that collects strips of printed
labels that have not been cut off
from the machine.
Attach the paper guide to the front of
the QL-560 as shown in the figure.
Remove the paper guide when printing
more than 10 labels continuously and
cutting each label automatically.

4 Connecting to the power supply

Connect the AC power cord to the QL-560 and then
plug the power supply cord into a standard electrical
socket.
Check that the electrical socket is 220 ~ 240 V before inserting
•
the plug.
Remove the power supply cord from the electrical socket after
•
you have finished using the QL-560.
Do not pull the cord when removing it from the electrical
•
socket. The wire in the cord may become damaged.
Paper guide