Publicité
Functions
Pause
While the robot is operating, press the power button on the App, the remote control or on the
robot to pause it and press the same button again to resume cleaning.
Standby
The robot will automatically enter standby mode after 5 minutes of no operation.
Press the power button on the App, the remote control or on the robot to start it up again.
Warnings
-
After 12 hours of no operation, the robot will turn automatically off.
-
The robot will not enter standby mode during charging.
Suction power level
Press the power levels button on the remote control to select the desired power level. Choose
between Eco (low power), Medium (medium power) and Turbo (high power).
Scheduling
Warning
The robot cannot be scheduled from more than one device at a time. Make sure to schedule it
either from the mobile phone App or from the remote control.
The robot is provided with a schedule function in order to provide a maximum-efficiency
cleaning. The time settings and the cleaning scheduling must be carried out from the remote
control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles
every scheduled day.
Note
Make sure the robot is activated and that the indicator light is on before scheduling any
cleaning or setting time.
Current time.Fig. 16.
-
Hold down the time button for 3 seconds. The first 2 digits, indicating the hour, will start
blinking.
-
Use the up and down direction buttons to set the current time. Then, use the left and right
buttons to switch from hours to minutes and repeat the before step. Fig. 17.
-
Press the time button again to save the settings.
Scheduling cleaning tasks
-
Hold down the schedule button for 3 seconds. The first 2 digits, indicating the hour, will
start blinking. Fig. 18.
ENGLISH
43
Publicité
