Publicité
1
ERROR MESSAGES
Sometimes things can go wrong. Fortunately Landroid Vision is smart enough to tell you if it is enountering an issue, so you can fix
it. If in doubt, please visit our website where you will find useful videos and further support.
MESSAGE
CAUSE
-EE-
Error unknown
-F01
Rain delay
-F02
Low battery
-E01
Out of working area
-E02
Wheels motor fault
-E03
Blade motor fault
-E04
Error trapped
2
1
ACTION
Please contact Customer Services.
Your Landroid Vision will start after the rain stops and the rain delay has
expired.
The device is low on power and cannot meet the current work. Please
charge it as soon as possible.
If Landroid Vision is actually outside its working area: turn power off, take
Landroid Vision inside its working area. Turn power on. Press
.
Turn power off and take Landroid Vision to an area free from obstacles.
Turn power on. Press
If the error message is still displayed, turn power off. Turn Landroid
Vision upside-down and check if there's anything preventing the wheels
from rotating.
Remove any obstruction, turn Landroid Vision upright, turn power on.
Turn power off.
Turn Landroid Vision upside down, put on safety gloves to prevent injury
and check if there's anything preventing the blade disc to rotate.
Remove any obstruction.
Turn Landroid Vision upright and take it to an area with short grass or
adjust the cutting height.
Turn power on. Press
Turn power off.
Take Landroid Vision to an area in your lawn free of obstacles, turn power
on. Press
If the error message is still displayed: turn power off, turn Landroid Vision
upside-down. Check if there is anything preventing the wheels from
rotating.
Remove any obstruction, turn the Landroid Vision upright, turn power
on. Press
then
.
then
.
then
.
then
.
EN
then
17
Publicité
