How To Use; Spot Cleaning - Dreame L40S Pro Ultra Mode D'emploi

How to Use

Turn On/Off
Press and hold the button for 3 seconds to turn on the robot. The
power indicator will remain lit. Or, place the robot onto the base
station by aligning the charging contacts of the robot with those of
the base station, and then the robot will turn on automatically and
begin charging. To turn off the robot, move the robot away from the
base station and press and hold the button
Fast Mapping
After configuring the network for the first time, follow the
instructions in the app to quickly create a map. The robot will start
mapping without cleaning. When the robot returns to the base
station, the mapping process has been completed and the map will
be saved automatically.
Pause/Sleep
When the robot is running, press any button to pause it.
If the robot is paused for more than 10 minutes, it automatically
enters sleep mode. All indicators on the robot will turn off. Press
any button on the robot, or use the app to wake up the robot.
Note: If the robot is paused and placed onto the base station, the current
cleaning process will end.
Auto Resume Cleaning
If the battery is too low, the robot will automatically return to the
base station to charge. After charging to the appropriate battery
level, it will resume unfinished cleaning tasks.
Note:To use this function, please enable it in the app.
Do Not Disturb (DND) Mode
When the robot is set to the Do Not Disturb (DND) mode, the robot
will be prevented from resuming cleaning. The DND mode is
disabled by default at the factory. You can use the app to enable
the DND mode or modify the DND period. The DND period is 22:00-
8:00 by default.
for 3 seconds.
Note:
· The scheduled cleaning tasks will be performed as usual during the DND
period.
· The robot will resume cleanup where it left off after the DND period expires.

Spot Cleaning

When the robot is on standby, press briefly the button
the spot cleaning mode. In this mode, the robot cleans a square-
shaped area of 1.5 × 1.5 meters around it and returns to its starting
point once the spot cleaning is completed.
Robot Restarting
If the robot stops responding or cannot be turned off, press and
hold the button
and hold the button
for 10 seconds to forcefully turn it off. Then, press
for 3 seconds to turn the robot on.
EN
to enable
16