Dreame L40s Pro Ultra Mode D'emploi page 17

Before Use
5. Add the Cleaning Solution
（1）Remove the dust tank cover and pull out the auto-detergent
compartment.
（2）Open the upper lid of the compartment and add the cleaning
solution.
（3）Close the lid of the compartment, put it back into the base
station, and then reinstall the dust tank cover. The cleaning solution
will be added automatically while working.
②
①
Note:
· The auto-detergent compartment can be filled up with cleaning solution
for use. Do not add any liquid other than the officially-approved cleaning
solution to help prevent malfunction.
· Install the auto-detergent compartment until it clicks into place.
6. Add Water to the Clean Water Tank
Take out the clean water tank from the base station and fill up the
tank with clean water. Then install it back into the base station.
①
②
Note: Do not add hot water into the water tank, as this may cause the tank to
become deformed.
EN
14