Toro Flex-Force Power System 14in 60V MAX Mode D'emploi page 11

5. Check the tool for damaged parts—If there are damaged guards or
other parts, determine whether it will operate properly. Check for
misaligned and binding moving parts, broken parts, mounting, and
any other condition that may affect its operation. Unless indicated in
the instructions, have an Authorized Service Dealer repair or replace
a damaged guard or part.
6. Do not replace the existing non-metallic cutting means on the tool
with a metallic cutting means.
7. Do not attempt to service or repair the tool, battery pack, or battery
charger except as indicated in the instructions. Have an Authorized
Service Dealer perform service using identical replacement parts to
ensure that the product is safely maintained.
8. Store an idle tool indoors in a place that is dry, secure, and out of
the reach of children.
9. Do not dispose of the battery in a fire. The cell may explode. Check
with local codes for possible special disposal instructions.
SAVE THESE
INSTRUCTIONS
9