Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
3. OPERATION AND MAINTENANCE
3. OPERATION
1. Insert the plug into a suitable wall outlet after turning the thermostat knob counter-
clockwise to the minimum position and setting the power switches to "O" OFF.
2. Press the switch button to either "I" (Low heating) or "II" (Medium heating) or both
"I+II" (High heating).
3. Turn the thermostat knob clockwise to maximum position (High). When the
temperature rises to with a comfortable level, slowly turn thermostat counter-clockwise
until the power indicator light just goes out.
4. To adjust the room temperature turn the thermostat clockwise to raise the
temperature, or counter-clockwise to lower it.
5. Your unit will be automatically set an on-and-off cycle to maintain the current room
temperature according to thermostat setting
6. To turn off the heater, press the switch button to "O" OFF. The power indicator light
turns off.
7. Unplug the product from the electrical outlet when it is left unattended or is not in
use.
4. MAINTENANCE
• This heater doesn't need any special maintenance. Dust it with a dry and soft cloth
only when the heater is disconnected and is cold.
• It's convenient to clean the surface of the heater at the beginning of the heating
season (always before connecting it).
Never use disolvents or abrasive products
HAT
12
Publicité
Table des Matières
