Assembly Of The Mounts And Wheels - Haverland HAT Manuel D'installation Et Utilisation

2. ASSEMBLY OF THE MOUNTS AND WHEELS

2. ASSEMBLY OF THE MOUNTS AND WHEELS
1
Remove the two (2) castor
wheels, two (2) arc-shaped
brackets and four (4) nuts from
the polystyrene protection,
leaving the protection placed on
the appliance.
KIT
3
Fit the two (2) castor wheels onto
the radiator by placing the arc-
shaped brackets between the
outermost fins on each side of
the radiator.
Securely fasten the two (2)
castor wheels onto the radiator
by screwing four (4) wing nuts
onto each castor.
Never use the radiator without placing the brackets with the wheels.
Only operate the radiator in normal upright position with castor wheel
assemblies attached to the bottom of the unit.
2
Place the radiator upside down.
x 2
x 4
4
Turn the radiator.
EN
EN
HAT
11