Publicité
•
Hold the equipment by the insulated
handles when carrying out work during
which the cutting blade could strike
concealed power cables. Contact with a
live cable might also make the metal parts
of the equipment live and cause an electric
shock.
•
Take care not to cut through any concealed
power cables.
•
Keep all parts of your body, especially your
fingers, away from the cutting blade. Never try
to remove cuttings while the blade is running.
Always switch off the equipment before
attempting to remove any jammed cuttings. A
single moment of carelessness when using
the equipment can result in serious injuries.
•
Keep your fingers away from the cutting blade
while the equipment is in operation. Take
care that the fingers you use to hold or guide
the branches to be cut are not injured by the
cutting blade.
•
Do not apply any force to the equipment. You
might slip and injure yourself in the process or
unintentionally cut something else.
•
Check the cutting blade for damage each
time before you start working.
•
Do not use the equipment if it has a damaged
or excessively worn cutting blade - replace
the damaged blade.
•
Always wear protective gloves while
working with the equipment or carrying
out maintenance/cleaning work on the
equipment.
•
Each time after using the equipment make
sure that the cutting blade is in the closed
position. Turn off the equipment using the ON/
OFF main switch. Use the blade guard.
•
Don't grasp the exposed cutting blades or
cutting edges when picking up or holding the
appliance.
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. Cutting blade (movable)
2. Counter blade (stationary)
3. Push lock
4. Trigger
5. LED indicator
5.1 Function switch (machine)
5.2 LED
6. Handle
Anl_GP_LS_18_28_Li_T_BL_SPK7_NA.indb 11
Anl_GP_LS_18_28_Li_T_BL_SPK7_NA.indb 11
EN
7. Battery mount (machine)
8. Belt clip
9. Blade guard cover
10. Function switch (pole)
10.1 LED for STANDBY
10.2 LED for ON-position
11. Battery mount (pole)
12. Trigger
13. Long handle (with handle 13.1)
14. Grip surface
15. Union nut
16. Telescopic pole
17. Lock-off button for swivel release
18. Lock-off button for tool release
19. Thrust piece
20. Toggle fastener
21. Holding bar
22. Hook
23. Assembly screws
24. Handle guard
25. Mount for machine
26. Counter-hook
27. Pushlock button
28. Battery capacity indicator
29. Battery capacity indicator button
30. Battery pack (not supplied)
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cordless Telescopic Pole Pruning Shear
•
Telescopic pole
•
Guard handle, screws
•
Blade guard cover
- 11 -
26.11.2024 10:04:22
26.11.2024 10:04:22
Publicité
