Télécharger Imprimer la page

ECOVACS DEEBOT X9 PRO OMNI Manuel D'instructions page 16

Masquer les pouces Voir aussi pour DEEBOT X9 PRO OMNI:

Publicité

Network Interface Information
Name
The infrared interface is turned off by default, and it is
Charging
activated when the robot is in the station.Provides power to
Interface
the station, and the main unit can connect with the charging
contacts on the station for charging.
Enable Bluetooth to connect the robot to the network during
Bluetooth
the network setup process.
Facilitate data transfer between the app and the robot,
WI-FI*
enabling control of the robot through the app.
ECOVACS products offer smart functions such as network
ECOVACS
setup, mapping, and cleaning mode selection (specific
HOME App
to each product). To utilize these features, users need to
download and use the official ECOVACS Home App.
* The DEEBOT series robotic vacuums are designed for domestic cleaning
scenarios. A home Wi-Fi network is required for operation, and anti-DDOS
protection needs to be configured by users through route settings.
Add Cleaning Solution (sold separately)
6
1. Take off the dust container cover, pull out the cleaning solution unit, and place it on
a level, hard surface.
Description
2. Unlid the cleaning solution unit and fill it with ECOVACS cleaning solution. Put
the lid on and the unit back to the station.
Note:
Cleaning solution is pumped automatically from the cleaning solution unit. Do not add
cleaning solution to the water tanks.
3. Insert the top latch of the dust container cover into the slot, and then press
downward to ensure a proper seal.
Note:
• Please use ECOVACS cleaning solution in case of malfunction.
• Please make sure that no foreign objects fall into the cleaning solution unit.
15 EN

Publicité

loading