Product Overview - Toro Power Plex 24In 40V Max Manuel D'utilisation

Setup
Note:
The battery pack is not fully charged when it
is purchased. Before using the tool for the first time,
refer to Charging the Battery Pack (page
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 1 for assistance in mounting the
charger.
Note:
Slide and twist the charger over the
appropriately positioned hardware to secure the
charger in place (hardware not included).
All manuals and user guides at all-guides.com
9).
Figure 1

Product Overview

Left Side of Hedge Trimmer
1. Blades
2. Guard
3. Auxiliary-handle switch
4. Auxiliary handle
5. Handle-rotation button
Specifications
Model 51491
610 mm
Cutting
Length
Rated 40 VDC maximum, 36 VDC nominal usage
Voltage
No-load 3000 spm at 40 VDC max
Speed
18 mm
Cutting
width
Charger 88542
Type
Battery Type 88540 (included with 51491), 88541 (sold
separately)
Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
g194202
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
7
Figure 2
6. Lock switch
7. Trigger
8. Battery latch
9. Battery pack
10. Protective cover
51491T
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)
g204357