Publicité
7
CARE AND MAINTENANCE
The components for assembling the KUDO
•
KBUMP rigging structure, 22-shackles, and ball locking pins.
•
KLIFT rigging accessory and 18-shackle.
•
KJACKx2 rigging accessories.
•
Rotating arms, ball locking pins, and rigging points on each KUDO
If components are used in the manner as described in this manual they will remain fully operational over the life of the
enclosures. However, in order to guaranty the system durability it is necessary to regularly check the following points:
!
The KBUMP, KLIFT, and KJACK accessories as well as the shackles and ball locking pins should not
show any deformation, crack, or rust.
WARNING
!
The metal components of the KUDO
indentation, or rust. They must be securely fixed to the enclosure.
Any enclosure incorporating a part showing signs of defect must immediately be put aside and
withdrawn from use to be inspected by qualified service personnel.
WARNING
!
Ensure that each ball locking pin on the KUDO
correctly by moving its mechanism and checking that it automatically returns to nominal position.
WARNING
KUDO_RM_ML_1.0
All manuals and user guides at all-guides.com
®
system are as follows:
®
enclosures should not show any signs of deformation,
w w w . l - a c o u s t i c s . c o m
®
enclosure.
®
enclosures and KBUMP structure operates
EN
27 en
Publicité
