MEMORY MARKER
In the playback of sources such as music, if the number
is suddenly started in a large volume, or if it suddenly
ends in an abrupt manner,
the effect would be quite
unnatural, To avoid such phenomena from occurring,
such recording
techniques are employed as those
known as FADE-IN, which is the technique in which
recording is started in a small volume and then is
gradually raised until the optimum
volume is reached,
or FADE-OUT, in which, the sound at the end of the
number is gradually diminished from an optimum
volume.
To effect FADE-IN,
the Recording
Input Control is
gradually tuned up until the volume reaches an
optimum recording level. Thus, it is necessary to have
the position of the optimum recording level marked in
advance.
Meanwhile,
in the case of FADE-OUT,
the
Input Control
is gradually tuned down
from the
position of the optimum recording level. In this case
too, it is necessary to have the position of the optimum
recording level marked.
Since the Memory
Marker is
not interlocked counterclockwise with the movement
of the Input Control, it is capable of indicating the
position of the optimum
recording level at all times.
Notably for FADE-IN, in which the Input Control is
tuned from minimum
up to the optimum-level posi-
tion, it is important that the optimum position of the
Input Control be indicated in advance.
The Memory Marker, by being set to the optimum
volume position, thus offers convenience in FADE-IN
and FADE-OUT operations.
*
This Memory
Marker
is interlocked
and although
will stop at the desired position it can be turned
clockwise if forced
REPERE DE MEMOIRE
Lorsqu'on enregistre de la musique, si l'enregistrement
commence tout de suite à fort volume ou si il s'arréte
de manière abrupte l'effet sera peu naturel, Pour palier
ces
inconvénients
on
a recours
à la technique
de
"fondu", technique qui permet de commencer un
enregistrement
à faible volume
puis de l'augmenter
graduellement jusqu'à ce que le niveau optimum soit
atteint, et inversement en fin de bande, cette tech-
nique permet de réduire progressivement le son.
Pour
le fondu
en
début
de bande,
il faut tourner
graduellement la commande
d'entrée d'enregistrement
jusqu'à ce que le volume se trouve au niveau optimum.
Il est par conséquent nécessaire que la position du
niveau
optimum
soit repérée
à l'avance.
En ce qui
concerne
le fondu
en fin de bande, il faut réduire
graduellement le niveau d'entrée à partir de la position
de niveau optimum. Il est également nécessaire dans ce
cas d'avoir un repére de niveau optimum d'enregistre-
ment. Bien que le mouvement du repére de mémoire
dépende du mouvement de la commande d'entrée dans
le sens des aiguilles d'une montre, le repère peut à tout
moment indiquer le niveau optimum d'enregistrement.
Il est
particulièrement
important
que
la position
optimum
de
commande
d'entrée
soit
indiquée
à
l'avance dans le cas du fondu en début de bande où
l'on fait passer la commande de bande du point de
niveau minimum au point optimum. La technique du
fondu est ainsi rendue plus facile gráce au repére de
mémoire.
* Le repére de mémoire est asservi et bien qu'il puisse
rester sur la position voulue on peut également
le
tourner dans le sens des aiguilles d'une montre.
SPEICHERMARKIERUNGEN
~ MEMORY
MARKER
REPERE
DE MEMOIRE
SPEICHERMARKIERUNGEN
Bei der Wiedergabe von Ton-Quellen, wie zum Beispiel
Musik, wo die Lautstürke plótzlich erheblich verstürkt
oder abgeschwücht werden kann, würde dies einen
unnatürlichen Effekt hervorrufen. Um solches zu ver-
meiden, wird die Aufnahme-Technik EINBLENDUNG
angewandt,
bei
welcher
die
Aufnahme
in geringer
Lautstärke
begonnen wird und dann langsam ansteigt
bis
ein
optimales
Tonvolumen
erreicht
wird,
oder
AUSBLENDUNG, wo der Ton gegen Ende des Stücks
langsam an Volumen abnimmt.
Um
eine EINBLENDUNG
zu ermóglichen, wird die
Aufnahme-Eingabe-Kontrolle langsam aufgedreht, bis
die Lautstürke
für einen
optimalen
Aufnahme-Pegel
erreicht wird. Es ist jedoch notwendig, die Stellung des
optimalen Aufnahme-Pegels im voraus zu bestimmen.
Währenddessen
wird im Falle einer AUSBLENDUNG
die Eingangs-Kontrolle vom optimalen Aufnahmepegel
herabgesetzt. Auch in diesem Falle ist es nôtig, die
Stellung des optimalen Aufnahme-Pegels zu markieren.
Da die Speichermarkierung
nicht gegen den Uhr-
zeigersinn
mit
der Bewegung
des Eingangs-Reglers
verbunden
ist, vermag sie jederzeit die Stellung des
optimalen Aufnahme-Pegels anzugeben.
Vor allem für
EINBLENDUNG, wo die Eingangskontrolle von einer
minimalen zu einer maximalen Pegel-Stellung erhóht
wird, ist es wichtig, daß die optimale Stellung der
Eingangskontrolle im voraus angegeben wird.
Die Speichermarkierung bietet den Vorteil, daß sie
auch
für
EIN-
und
AUSBLENDUNGS-Operätionen
verwendet
werden
kann, wenn
sie auf eine optimale
Lautstärke eingestellt ist
* Diese Speichermarkierung ist verzahnt, und obwohl
sie in der gewünschten Stellung stoppen wird, kann
sie falls erforderlich im Uhrzeigersinn gedreht wer-
den.
na