Conditions Of Use - Festo DRD Série Notice D'utilisation

DRE/DRD
5

Conditions of use

Warning
Incorrect handling can result in malfunctioning.
S Make sure that all the instructions in this chapter are observed. This way the
product will perform as intended.
Use the product in its original state. Unauthorised modification is not
S
permitted.
Ensure that all applicable national and local safety laws are adhered to.
S
Remove the packing except for the
S
adhesive labels on the compressed air
connections (to prevent dirt from
entering).
The packaging is intended for recycling (exception: oiled paper = other waste).
Compare the maximum values specified in these operating instructions with
S
your actual application (e.g. pressures, forces, torques, masses, response
times, temperatures). The product can only be used in accordance with the
relevant standards if the maximum loading limits are observed.
Take into account the ambient conditions
S
at your location. Corrosive environments
reduce the service life of the product.
Protect the device from fluctuations in
S
pressure and excess operating tempera
ture. Use control valves for regulating
pressure and excess pressure.
Make sure there is a supply of correctly
S
prepared compressed air. The product
requires dried compressed air, lubricated
or unlubricated.
22
Fig. 2
[°C] [%]
Fig. 3
LF−... LR−...
Fig. 4
Festo DRD/DRE 0703a English
[mbar]
LD−...