Publicité
5.2
SPRAY TIP MAINTENANCE
If there is too much pump pressure, the spray tip can
become clogged. You can feel a pulsing sensation
while you pull the spray gun trigger.
5.2.1
REMOVE THE SPRAY TIP
1.
Pull back and hold the quick-connect collar on the
spray wand.
2.
Remove the spray tip from the spray wand.
5.2.2
CLEAN THE SPRAY TIP
1.
Use a straight paper clip or cleaning tool to clean
the spray tip.
2.
Flush and clean the unwanted materials out of
the spray tip with the garden hose.
3.
Install the clean spray tip to the spray wand.
6
TRANSPORTATION AND STORAGE
WARNING
Disconnect the power cord and water supply hose
before transportation and storage.
6.1
MOVE THE PRODUCT
• Point the spray wand in a safe direction.
• Only hold the product with the handgrip.
6.2
STORE THE PRODUCT
WARNING
Make sure that the spray gun, the high-pressure
hose and the product are dry.
English
Make sure the product is out of the reach of children.
• Disconnect the garden hose from product.
• Wind the power cord and the high-pressure hose.
• Clean housing and the plastic components with a
moist and soft cloth.
• Make sure that the product does not have loose or
damaged parts. If it is necessary, follow these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• If needed, call the customer service phone
number for servicing instructions.
• Store the product in a dry, isolated and frost-free
area.
11
WARNING
EN
Publicité
