Razor RAMBLER 16 Manuel D'instructions page 22

Table des Matières
EN
Electric Motor Continuous
Model
Rated Power
Rambler
350 W
16
Maintenance
• Always inspect product before riding and regularly maintain it. Replace worn or damaged parts immediately.
• Check that the steering system is correctly adjusted and that all connection components are firmly secured and not broken.
• Check brake for proper function. When you squeeze the brake lever brake should provide positive braking action.
• Under normal circumstances and conditions, the wheels and bearings are maintenance free.
• Regularly check that the various screwed parts are tight.
Nut Diameter (mm)
Suggested Torque (N/M)
5 mm
6 mm
8 mm
10 mm
12 mm
• No modifications can be made that can impair safety.
• Wipe with a damp cloth to remove dirt.
• Use only authorized Razor replacement parts.
WARNING: As with any mechanical component, this product is subject to high stresses and wear. The various materials and components
may react differently to wear or fatigue. If the expected service life for a component has been exceeded, it may break suddenly, therefore
risking causing injuries to the user. Cracks, scratches and discoloration in the areas subject to high stresses indicate that the component has
exceeded its service life and should be replaced.
Storage
Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials; store indoors when not in use.
Limited Warranty:
This Limited Warranty is the only warranty for this product. There is no other express or implied warranty.
The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from date of purchase.
This Limited Warranty will be void if the product is ever:
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented.
Failure to use common sense and heed the above warnings further increases risk of serious injury. Use at your own risk and with
appropriate and serious attention to safe operation. Use caution.
CONTAINS SEALED NON-SPILLABLE LEAD ACID BATTERIES.
BATTERIES MUST BE RECYCLED.
Voltage
(Nominal) Vdc
36
4~6 N/M
7~10 N/M
18~25 N/M
33~44 N/M
58~77 N/M
Capacity
Charge
(Nominal) Ah
Temperature Range
-10° to 40°C
7
14° to 104°F
20
Original instructions
Operating
Temperature Range
-10° to 40°C
14° to 104°F
Table des Matières
loading

Table des Matières