Publicité
m) The product is not a toy. Cleaning and maintenance must not be performed by children without
adult supervision.
n)
Do not tamper with the device to alter its performance or design.
o)
Keep the unit away from sources of fire and heat.
p)
Do not overload the device. Do not exceed the maximum load of the unit!
q)
Before using the machine, the operator must carry out a test run without load and check the
following:
•
does the switch allow the load to be lifted, lowered and stopped at any time,
•
whether the crane moves freely and without disturbances,
•
whether there are any unusual noises during the operation of the electric winch,
•
can the cable be rolled up and unrolled freely.
r)
It is forbidden to tilt the suspended loads or drag them on the ground.
s)
Do not use the unit outdoors when it is raining or the weather conditions are unfavourable.
t)
It is forbidden to walk or stay under the suspended load (and in its immediate vicinity). It is
forbidden to lift people or animals with this device.
u) Do not leave suspended loads unattended.
v) After mounting, balance the weight suspended from the hook block.
w) The load must not hang on the hook for too long, otherwise it may damage the unit or lead to
accidents.
x)
Check that the cable is not hanging too loosely. Always roll the cable properly to avoid damaging
it. If the cable is worn, it must be replaced.
y) If the device has been overloaded or subjected to strong shocks, it must be checked by an
authorized service technician before use.
z)
Avoid rocking the load.
aa) The device enables the transport of objects on straight and curved rails.
bb) Before suspending the load, always ensure that the space in which it will be transported is clear
of obstructions.
cc) Do not perform mechanical or similar work (welding, cutting, etc.) on suspended loads.
dd) Loads must be lifted off the ground at the slowest possible speed. When transporting with the
unit, avoid shocks, impacts and sudden changes in speed. This will reduce the risk of the load
falling from a height.
ee) The device is not designed for continuous operation. Observe the operating cycle of the device.
ATTENTION! Despite the safe design of the device and its protective features, and despite the
use of additional elements protecting the operator, there is still a slight risk of accident or injury
when using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The device is designed for vertical lifting and lowering of loads with the possibility of moving in horizontal
directions along the profile.
EN
Publicité
