Optelec TwinView Manuel D'utilisation page 14

Optelec TwinView
If you are using ZoomText version 9.04 or later or SuperNova version 11.50 or later, install
the included TwinView software from the Optelec TwinView CD. To determine the version
of ZoomText or SuperNova that you work with, check the "About" box in the help menu.
Simply use the TwinView buttons to select the preferred split-screen orientation –
horizontal or vertical – and the split screen functionality of ZoomText or SuperNova is set
automatically. No further adjustments are required within ZoomText or SuperNova.
Please note: Earlier versions than ZoomText version 9.04 and SuperNova version 11.50,
as well as other screen magnification software, are not supported by the TwinView
software. If you are using an older version of ZoomText or SuperNova, or other screen
magnification software, you will need to adjust the split screen functionality manually.
Please refer to your screen magnification manual for instructions on how to manually
configure the split screen function.
Page 12