Safety And Care - Optelec TwinView Manuel D'utilisation

Optelec

2. Safety and Care

Please read the instructions carefully before setting up your Optelec TwinView. Keep this
user manual for future reference.
 Use the TwinView indoors. Do not expose the TwinView to extreme or rapid changes in
temperature or humidity.
 Do not place the TwinView near a radiator or heater, or where it may be exposed to
direct sunlight. These conditions may damage the TwinView's electronic components.
 Do not place the TwinView on an unstable surface. It may fall, causing serious damage
to the unit, or injury to the user.
 The monitor stand contains movable parts. Please be careful when adjusting the stand
and screen position as to prevent fingers or any loose clothing from getting caught in
the operating mechanism. If you have difficulty operating the TwinView safely, please
seek assistance or contact your Optelec distributor.
 Contact your Optelec distributor to service this device if necessary. Do not open your
TwinView; this will void the warranty.
 Always turn the power off when the TwinView is not in use.
 Always unplug the TwinView before cleaning it. Use a soft, damp cloth to clean the
exterior surfaces. Do not use any cleaning agents or any abrasive materials as these
will damage your TwinView.
 Only use the (ClearView+) power supply or included (ClearView+) power connection
cable for your TwinView.
TwinView
Page 8