Menu Information; Menu Language; Menu Settings; Menu Factory Defaults - Optelec TwinView Manuel D'utilisation

Optelec

5.4.4 Menu Information

The Information menu displays the screen resolution and frequency.
- Select the channel of which you would like to view the resolution and frequency by
pressing the channel A or channel B button;
- Activate the menu by pressing the menu button;
- Select Information by using the up and down cursor keys and activate the option by
pressing the A/B button;
- Use the menu Exit or press the Menu button to leave this submenu.

5.4.5 Menu Language

This menu option configures the language setting of the TwinView menu. The menu
language can be changed individually for channel A and channel B. To set the language:
- Select the channel of which you would like to change the menu language by
pressing the channel A or channel B button;
- Activate the menu by pressing the menu button;
- Select Language by using the up and down cursor keys and activate the option by
pressing the A/B button;
- Select the language of your choice by using the up and down cursor keys and
activate the chosen language by pressing the A/B button;
- Use the menu Exit or press the Menu button to leave this submenu.

5.4.6 Menu Settings

Use the menu Settings to adjust the menu timeout. This is the time that the TwinView
menu will be displayed on screen when no button is pressed. By default, the menu timeout
is set to 30 seconds. To change the timeout setting:
- Select the channel of which you would like to change the timeout settings by
pressing the channel A or channel B button;
- Activate the menu by pressing the menu button;
- Select Settings by using the up and down cursor keys and activate the option by
pressing the A/B button;
- Select menu Timeout by using the up and down cursor keys and activate the
chosen option by pressing the A/B button;
- Use the left and right arrow keys to adjust the Timeout value;
- Use the menu Exit or press the Menu button to leave this submenu.

5.4.7 Menu Factory Defaults

Activating this menu will restore the TwinView settings to the factory defaults for the
selected channel:
- Select the channel of which you would like to restore the factory default settings by
pressing the channel A or channel B button;
- Activate the menu by pressing the menu button;
- Select Factory Defaults by using the up and down cursor keys and activate the
option by pressing the A/B button;
- The settings will now be restored to the factory defaults;
- Use the menu Exit or press the Menu button to leave this submenu.
TwinView
Page 17