Connections; Powering The Twinview - Optelec TwinView Manuel D'utilisation

Optelec
Alternatively, for those using the PC frequently, the TwinView can be
mounted on an off-the-shelf monitor arm (purchased locally, for example).
Another option is to mount the TwinView on the flexible monitor arm of the
ClearView+ (not on the Ultra Flexible Arm) to create an 'in-line'
ClearView+ system. Please contact your Optelec distributor for more
information.
To adjust the height of the TwinView stand, the transport lock needs to be
unlocked first. Press and hold the button located at the back of the stand and gently
increase the height of the stand.
The TwinView can be adjusted in both height and viewing angle for an optimal reading
position. Grip the flat panel on both sides to adjust to your preferred position.

3.2.2 Connections

All connections are located on the back of the TwinView. When the back of the TwinView
is facing you, the connections from left to right are:
 Power connector
o Use the 12V DC monitor power cable to connect and power the TwinView from
the ClearView+ monitor power socket, or
o Use the included adaptor cable to connect a standard ClearView+ power supply
to the TwinView monitor's DC jack.
 USB to PC connector – to connect the TwinView to the PC and establish the
communication between the TwinView and the ZoomText or SuperNova magnifier
intelligent split screen adjustment.
 DVI channel B to PC connector – to connect the PC to the TwinView over DVI.
 VGA channel B to PC connector – to connect the PC to the TwinView over VGA.
 DVI channel A to video magnifier connector – to connect a video magnifier or other
device to the TwinView over DVI.
 VGA channel A to video magnifier connector – to connect the ClearView+ (or
another video magnifier) to the TwinView over VGA.

3.2.3 Powering the TwinView

To power the TwinView, there are two options:
TwinView
Page 10