PRO-POINT 8306052 Manuel D'utilisation page 9

V1.0 1/2 IN. DR MAINTENANCE FREE AIR IMPACT WRENCH
OPERATION
WARNING! This tool generates considerable torque when in
use. Always
brace yourself
the workpiece.
1. Tighten the nut as far as you can by hand before using the
impact wrench.
2. Connect the wrench to
3. Set the reverse valve to the left, so that the anvil turns
clockwise (forward).
4. Place the
firmly with both hands and gently squeeze
5. Turn the
arrow on the
other direction to decrease the power.
IMPORTANT!
fastener to your satisfaction, do not raise
the compressor
strip the workpiece and
tool failure and serious injury. Use other appropriate methods
and tools to tighten the
6. When the fastener is tightened,
remove the
7. Use a mechanical torque wrench to check fastener torque.
8. To loosen,
anvil turns counterclockwise (reverse).
Visit www.princessauto.com for more information
hold the tool
to resist the torque which will be delivered
socket over the fastener, grip the
air regulator
regulator
If the impact wrench
over 100 PSI. Pressures above 100
tool and socket.
set the reverse valve to the right, so that the
with both hands when using, and
the air hose.
in the direction indicated by
to increase
does
damage the tool, potentially causing
nut.
release
impact
the
the power. Turn
not tighten
the air pressure on
the trigger and
8306052
to
wrench
trigger.
the
in the
the
PSI will
9