AEG IAE84881IB Notice D'utilisation page 19

6.16 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. The speed of the fan is
defined automatically on the basis of the
mode setting and the temperature of the
hottest pot on the hob.
For most of the hoods the remote system is
originally deactivated. Activate it before you
use the function. For more information refer
to the hood user manual.
To operate the function automatically, set the
automatic mode to H1 - H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the cookware
automatically and adjusts the speed of the
fan. You can set the hob to activate only the
light by selecting H1.
If you change the fan speed on
the hood, the default connection
with the hob is deactivated. To
reactivate the function, turn both
appliances OFF and ON again.
Mode Auto‐
Boiling 1)
matic
light
H0 Off Off
H1 On Off
3)
On Fan speed 1
H2
H3 On Off
H4 On Fan speed 1
H5 On Fan speed 1
H6 On Fan speed 2
1) The hob detects the boiling process and acti‐
vates fan speed in accordance with the auto‐
matic mode.
2) The hob detects the frying process and acti‐
vates fan speed in accordance with the auto‐
matic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the modes
If you are not satisfied with the noise level /
fan speed, you can switch between modes
manually.
1. Touch
Select Settings > Hob²Hood from the list.
2. Choose the appropriate mode.
To leave the Menu touch
of the display, outside of the pop-up window.
When you finish cooking and deactivate the
hob, the hood fan may still operate for a
certain period of time. After that time the
system deactivates the fan automatically and
prevents you from an accidental activation for
the next 30 seconds.
The light on the hood deactivates 2 minutes
after deactivating the hob.
6.17 Language
1. Touch
2. Select Settings > Setup > Language from
3. Choose the appropriate language from
Frying 2)
If you chose the wrong language, touch
A list appears. Select the third option from
the top, then the last but one option. Next,
Off
select the second option. Scroll down to
Off choose the appropriate language from the
list. Finally, choose the option on the right.
Fan speed 1
To leave the Menu, touch
Fan speed 1
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
Fan speed 1
Fan speed 2
6.18 Key Tones / Buzzer Volume
Fan speed 3
You can choose the type of sound your hob
emits or turn the sounds off entirely. You can
choose between the click (default) or beep.
1. Touch
2. Select Settings > Setup > Key Tones /
3. Choose the appropriate option.
.
on the display to open the
Menu.
the list.
the list.
on the display to open the
Menu.
Buzzer Volume from the list.
or the right side
.
or the right side
ENGLISH 19