Translation Of The Original Eu Declaration Of Conformity - Parkside Performance Ppwsfa 20-Li B3 Traduction Des Instructions D'origine

GB MT
Translation of the original EU declaration of
conformity
Product: Cordless Flat Head Angle Grinder
Model: PPWSFA 20-Li B3
Serial number: 000001 – 065000
The object of the declaration described above is in conformity with the relevant
Union harmonisation legislation:
2006/42/EC • 2014/30/EU • 2011/65/EU & (EU) 2015/863
Product with battery Smart PAPS 204 A1/Smart PAPS 208 A1: 2014/53/EU
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment.
To ensure conformity, the following harmonised standards and national stand-
ards and regulations have been applied:
EN 62841-1:2015/A11:2022 • EN IEC 62841-2-3:2021/A11:2021
EN IEC 55014-1:2021 • EN IEC 55014-2:2021
Product with battery Smart PAPS 204 A1/Smart PAPS 208 A1:
EN 301 489-1 V2.2.3:2019 • Draft EN 301 489-17 V3.2.6:2023
This declaration of conformity is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
04.11.2024
56
EN IEC 63000:2018
EN 300 328 V2.2.2:2019 • EN 50663:2017
Christian Frank
Authorised representative of docu-
mentation