Stihl RMA 239.1 C Notice D'emploi page 47

Masquer les pouces Voir aussi pour RMA 239.1 C:
Table des Matières
Les langues disponibles
  • FR

Les langues disponibles

19 Troubleshooting
Error
LEDs on the
battery
3 LEDs flash
red.
3 LEDs light up
red.
4 LEDs flash
red.
The lawn mower
3 LEDs light up
switches off
red.
while in opera‐
tion.
The lawn mower
vibrates excessi‐
vely during ope‐
ration.
The lawn mower
runtime is too
short.
0478-131-9630-B
Cause
There is an error in
the lawn mower.
The lawn mower is
too warm.
There is an error in
the battery.
There is a break in the
electrical connection
between the lawn
mower and the bat‐
tery.
The lawn mower or
the battery is damp.
The resistance on the
cutting blade is too
great.
The area around the
cutting blade is
blocked.
The lawn mower is
too warm.
The cutting blade is
jammed.
There is an electrical
error.
The screw on the
blade is loose.
The cutting blade is
not correctly balan‐
ced.
The battery is not fully
charged.
The battery service
life has been excee‐
ded.
Remedy
► Remove the battery.
► Clean the electrical contacts in the bat‐
tery compartment.
► Insert the battery.
► Switch on the lawn mower.
► If 3 LEDs continue to flash red: Do not
use the lawn mower and instead consult
a STIHL authorized dealer.
► Remove the battery.
► Allow the lawn mower to cool down.
► Remove the battery and reinsert it.
► Switch on the lawn mower.
► If 4 LEDs continue to flash red: Do not
use the battery and instead consult a
STIHL authorized dealer.
► Remove the battery.
► Clean the electrical contacts in the bat‐
tery compartment.
► Insert the battery.
► Remove the battery.
► Clean the lawn mower.
► Allow the lawn mower or battery to dry,
20.6.
► Increase the cutting height.
► Switch on the lawn mower in shorter
grass.
► Clean the lawn mower.
► Remove the battery.
► Allow the lawn mower to cool down.
► Clean the lawn mower.
► Do not switch on lawn mower too often
within a short time.
► Increase the cutting height.
► Mow shorter grass.
► Remove the battery.
► Clean the lawn mower.
► Remove the battery and reinsert it.
► Switch on the lawn mower.
► Securely tighten the screw.
► Sharpen and balance the cutting blade.
► Fully charge the battery as described in
the User Manual for STIHL AL 101, 301,
500 and 501 chargers.
► Replace battery.
English
47
Table des Matières
loading

Table des Matières