Daily Maintenance; Weekly Maintenance; Monthly Maintenance; Maintenance - EdilKamin KIKKA 8 Installation, Usage Et Maintenance

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Before performing any maintenance, disconnect the ap-
pliance from the mains.
Regular maintenance is required for the stove to function
correctly.
Any problems resulting from lack of maintenance will im-
mediately void the warranty.
N.B.
- Any unauthorised modifi cation is forbidden
- Use spare parts recommended by the manufacturer
- The use of counterfeit parts results in the guarantee beco-
ming null and void

DAILY MAINTENANCE

Operations must be performed when the stove is off, cold
and unplugged from the power supply
• Cleaning must be carried out with a vacuum cleaner. (see
optional extras page 42).
• Open the door, extract the fi re box (1 - fi g. A) and tip the
residue into the ash drawer (2 - fi g. B).
• DO NOT EMPTY THE RESIDUE OUT INTO THE PEL-
LET HOPPER.
• Pull the ash drawer (2 - fi g. b) out and empty it into a non-
fl ammable container (the ash may still have some parts that are
hot and/or embers).
• Vacuum out the inside of the fi re box, fi re grate, and space
around the fi re box, into which the ash falls.
• Remove the fi re box (1 - fi g. A) and remove any encrustation
using the brush provided, clearing any clogging in the holes.
• Vacuum the fi re box, clean the contact edges between the fi re
box and its seating.
• Clean the glass, if necessary (when cold).
Never vacuum hot ash, it can make the vacuum cleaner
breakdown and represents a fi re risk.
ATTENTION:
MAKE SURE THE ASH TRAY IS CORRECTLY POSI-
TIONED IN ITS HOUSING

WEEKLY MAINTENANCE

• Remove the ceiling (3 - fi g. C) and tip the residue into the ash
drawer (2 - fi g. B).
The ceiling is a component subject to wear, Edilkamin does
not accept responsibility for it, more so if any breaks are due to
extracting or putting it back in its seating.

MONTHLY MAINTENANCE

In case of fl ue outlet from the top (page 28) clean the internal
part of the connecting band removing the inspection (4 - fi g. D)

MAINTENANCE

fi g. A
fi g. B
fi g. C
fi g. D
- 39
-
1
2
3
4

Publicité

Table des Matières
loading

Table des Matières