Principle Of Operation; General Information - EdilKamin KIKKA 8 Installation, Usage Et Maintenance

GENERAL INFORMATION

PRINCIPLE OF OPERATION

I
The stove produces hot air using wood pellets as fuel, with
electronically controlled combustion.
A
Hereunder is the explanation of its functions (the letters refer to
fi gure 1).
The fuel (pellets) is taken from the hopper (A) and, using a
B
screw (B) operated by a gear motor (C), is sent to the crucible
(D).
D E
The pellets are lit by hot air produced by an electrical element
C
(E) sucked into the crucible through a smoke extractor fan (F).
The smoke produced by combustion is extracted from the
F
combustion chamber by the same fan (F) and expelled from the
G
vent (G) which can be connected to the back, the left side or
the top of the stove (see page 33).
The heart, coated in steel/cast iron, is frontally closed by a
ceramic glass door.
fi g. 1
The quantity of fuel, the extraction of the smoke and the input
of air for combustion are regulated by a motherboard equipped
with software, to obtain a high combustion yield and low emis-
sions.
The main phases can be managed by display or remote control
supplied as optional.
The stove is equipped with a serial port to connect an optional
cable (code 640560) to be connected to devices that allow
remote ignition (e.g. remote telephone, local thermostat, ect.)
- 26
-