Sage the Duo-Temp Pro Guide Rapide page 4

WE RECOMMEND SAFETY FIRST
machine as metal surfaces are
liable to get hot during use.
• Do not touch hot surfaces. Allow
the product to cool down before
moving or cleaning any parts.
• Heating element surface is
subject to residual heat after use.
• Always ensure the appliance
is turned OFF, unplugged at
the power outlet and has been
allowed to cool before cleaning,
attempting to move or storing.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote-control system.
• The use of attachments not
sold or recommended by
Sage may cause fire,
electric shock or injury.
• Always turn the appliance to
the off position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Any maintenance other than
cleaning should be performed
by an authorised Sage
Service centre.
• Do not use the appliance on a
sink drain board.
• Do not operate the appliance
if it is in an enclosed space,
or within a cupboard.
• Use caution when descaling
as hot steam may be released.
Before descaling, ensure drip
tray is empty and inserted.
Refer to 'Care & Cleaning'
for further instructions.
4
SPECIFIC INSTRUCTIONS
FOR WATER FILTER
• Filter cartridge should be kept
out of reach of children.
• Store filter cartridges in a dry
place in the original packaging.
• Protect cartridges from heat
and direct sunlight.
• Do not use damaged
filter cartridges.
• Do not open filter cartridges.
• If you are absent for a prolonged
period of time, empty the water
tank and replace the cartridge.
It should be taken to a local
authority waste collection centre
designated for this purpose or to
a dealer providing this service.
For more information, please
contact your local council office.
®
appliance in water or any
other liquid.
FOR HOUSEHOLD
USE ONLY
SAVE THESE
INSTRUCTIONS
The symbol shown
indicates that this appliance
should not be disposed of
in normal household waste.
To protect against electric
shock, do not immerse the
power cord, power plug or