Environment; Service And Maintenance; General Information; Bluetooth - Festool CT MINI I HEPA Notice D'utilisation D'origine

4
4-1
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
The lid of the hose holder also serves as a
storage area for tools.

10 Environment

Do not dispose of the device as domestic
waste! Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the respective nation­
al regulations.

11 Service and maintenance

WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festoolusa.com/service
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festoolusa.com/service
► Regularly clean the fill level sensors [4-4]
4-2
and empty the dirt trap .
4-3
4-4
Observe the following information:
– Dust-related inspection (e.g. for filter dam­
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!

12 General information

12.1 Bluetooth

The Bluetooth
registered trademarks of Bluetooth SIG, Inc.;
they are used by TTS Tooltechnic Systems AG &
Co. KG, and therefore by Festool, under licence.
FCC Compliance Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
three conditions:
(1) This device may not cause harmful interfer­
ence, and
(2) this device must accept any interference re­
ceived, including interference that may cause
undesired operation. No changes shall be made
to the equipment without the manufacturer's
permission as this may void the user's authority
to operate the equipment. This device has been
designed and complies with the safety require­
ments for portable RF exposure in accordance
with FCC rule part 2.1093 and KDB 447498 D01.
(3) changes or modifications not expressly ap­
proved by the party responsible for compliance
®
® word mark and the logos are
English
15