10 Troubleshooting
Flow noise during dust extraction
Automatic bypass: A valve opens that supplies
the turbine with cooling air:
Cause
Blocked filter element, filter bag
full or blocked suction hose
Solution Empty container, replace or clean
filter element, replace filter bag,
check suction hose for blockage
and remove, if necessary
11 Transportation
Observe the following information:
–
Before transportation, always close the T-
Loc at the dust extractor or connect to the
storage box.
–
For transportation in vehicles, secure the
device against slipping and tilting in ac
cordance with the valid guidelines.
12 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac
cessories and packaging. Observe appli
cable national regulations.
EU only: In accordance with the European Di
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re
cycling.
Information on REACH: www.festool.com/reach
13 EU Declaration of Conformity
Dust-extractor
CTL SYS
Year of CE mark 2014
We declare under sole responsibility that this
product complies with all the relevant require
ments in the following Directives, standards
and normative documents:
2006/42/EC, 2004/108/EC (until 19th April 2016),
2014/30/EU (from 20th April 2016), 2011/65/EU,
EN 60335-1:2012, EN 60335-2-69:2012, EN
55014-1:2006+A1:2009+A2:2011,
EN 55014-2:1997+Corrigendum
1997+A1:2001+A2:2008, EN 61000-3-2:2006+A1:
2009+A2:2009, EN 61000-3-3:2013.
Series no.
500162, 500164, 500165,
500922
Festool GmbH
Wertstr. 20, 73240 Wendlingen, Germany
Wolfgang Zondler
Head of Research, Development and Technical
Documentation
2015-09-03
English
15