Leveling The Dryer; Installation On An Elevated Base - Miele professional PT 8257 Mode D'emploi

Masquer les pouces Voir aussi pour PT 8257:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS

Leveling the dryer

The dryer does not need to be installed on a base.
However, adjustments must be made to compensate
for any unevenness in the floor.
The dryer must be level for proper operation.
^ Level the dryer by turning the feet clockwise or
counterclockwise (A) as necessary.
^ Once leveled, the discs (B) must be screwed tight
to the dryer's base plate.
34

Installation on an elevated base

The dryer can be installed on an elevated concrete
base.
,
If installing the dryer on an existing concrete
base, it must be secured with retaining clips.
Otherwise, the dryer may fall off the base.
^ Secure the front feet of the dryer with the retaining
clips provided.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Pt 8337Pt 8407Pt 8507

Table des Matières