Adjust The Program (If Desired) - Miele professional PT 8257 Mode D'emploi

Drying

5. Adjust the program (if desired)

To change program settings before starting the
program:
^ Confirm the selected program by pressing the jog
shuttle.
2 Cottons
0 % Drying
Cool down
The maximum laundry weight is shown on the right
side in the display.
Laundry weight
The laundry weight can be manually selected.
2 Cottons
0 % Drying
Cool down
^ Turn the jog shuttle until "Laundry weight" is
highlighted and press to confirm the selection. Turn
the jog shuttle to the desired laundry weight and
press to confirm the selection.
Temperature
In 1 °F or °C steps from 86 °F / 30 °C to max. 203 °F /
95 °C.
^ Turn the jog shuttle to "Temperature" and press to
confirm the selection.
2 Cottons
0 % Drying
Cool down
^ Turn the jog shuttle to the desired temperature and
press it to confirm the selection.
12
22.0 / 22.0 lb
176°F
e
A
m
22.0 22 lb
176°F
e
A
m
22.0 lb
176°F
e
A
m
Residual moisture
In 1 % steps from -4 to 40 %.
^ Turn the jog shuttle to "Residual moisture" (0 %)
and press to confirm the selection.
2 Cottons
0 % Drying
Cool down
^ Turn the jog shuttle to the desired percentage and
press it to confirm the selection.
^ Press the "Start" button to begin the program.
The program sequence is shown in the display after
the start of the program.
2 Cottons
0 % Drying
Cool down
In the second display line, "Drying" in the display
above, the actual residual moisture is shown (>40%)
and if the heating { is active. The third line shows the
following program block.
The "Finish at 12:35" on the right side shows the end
time of the program.
The "Finish at" display has a self learn function.
Several program cycles are necessary for an exact
display.
22.0 lb
176°F
A
m
>40 %{
Finish at 12:35
m K f