Miele professional PT 8257 Mode D'emploi page 29

Power failure
y
Program stop.
Press Start.
^ Press "START" to continue the program.
Heating system fault
§
Program stop. Press Start.
Program runs with cold water.
^ Press "Start" to continue the program without
heating. Contact Technical Service.
Heating system fault
§
Contact Technical Service.
if restart w/o success.
^ Contact Technical Service.
Pressure sensor fault
§
Contact Technical Service
if restart w/o success.
^ Contact Technical Service, if restart is not
successful.
Gas system fault
§
Contact Technical Service
if restart w/o success.
If the error occurs immediately after the program
start:
^ Open the gas valve and press "Start".
If the error occurs in the middle of a program run, the
gas pressure may have decreased due to use of
additional gas appliances.
^ Press the "Start" button.
^ Contact the Technical Service Department, if
restart is not successful.
Card fault
§
Reinsert card correctly in card
reader.
f
^ Insert the card properly into the card reader.
f
f
f
f
Frequently asked questions
A
29