Miele professional PT 8257 Mode D'emploi page 33

The dryer must be installed and tested by Miele's
Technical Service Department or an authorized
dealer.
This appliance must be installed in accordance with
the applicable regulations and may only be used in a
room with adequate ventilation.
Read the instructions prior to installation and use of
this appliance.
Do not install the dryer in rooms where the
temperature may drop below freezing.
,
The dryer must not be transported without the
shipping pallet.
At the installation location, lift the dryer from the
shipping pallet using appropriate lifting equipment.
IMPORTANT SAFETY INSTRUCTIONS
To allow easy access for maintenance and servicing,
the minimum dimensions and distance to the wall
must be observed.
PT 825X / 833X / 840X
x 55 1/8" (1400 mm)
y 35 11/16" (906 mm)
z 33" (836 mm) /
40 1/8" (1019 mm) /
45 3/16" (1148 mm)
PT 850X
64 9/16" (1640 mm)
47 ½" (1206 mm)
39 7/16" (1002 mm) /
53 7/8" (1368 mm)
33