Securing The Refrigerator - Dometic Rm10.5G Instructions De Montage

Installing the refrigerator
5.6 Install the roof vent
No. in
fig. f, page 11
1
2
1. Seal the installation frame to make the connection waterproof (fig. g, page 11).
2. Insert the installation frame and screw it down tightly (fig. h, page 12).
Use all the fixing holes for this.
3. Insert the hood and screw it down tightly (fig. i, page 12).
5.7

Securing the refrigerator

!
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
I
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
1. Move the refrigerator into its final location.
2. Fasten the screws (fig. j 1, page 12) through the plastic jacket in the sides of
the refrigerator, and further into the wall.
3. Put the caps (fig. j 2, page 12) onto the screw heads.
26
Description
Hood
Installation frame
RM10.5, RMS10.5
EN