Gaggia BRERA Sup 037RG Mode D'emploi page 41

Machine Actions
Coffee is brewed slowly.
(see note)
Coffee leaks out of the dispensing
head.
Note: These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed.
In this case wait until the machine performs a self-adjusting operation as described in section "Gaggia Adapting System".
Please contact Gaggia Customer Service or an authorized service center for any problems not covered in the above table or
when the suggested solutions do not solve the problem.
4219-465-04381 GAG. MAN. BRERA IT-EN-DE-FR Rev.00.indd 41
Causes
The coffee grind is too fine.
The circuit is not primed.
The brew group is dirty.
The dispensing head is clogged.
Solutions
Change coffee blend or adjust the grind as
explained in the "Coffee Grinder Adjustment"
section.
Prime the circuit (section "Using the Machine
for the First Time").
Clean the brew group (section "Brew
Group").
Clean the dispensing head and its holes.
14/10/2020 14:49:28
• 41 •