Unit For Temperature Display - Dometic Coolair Rtx1000 Instructions De Montage

Configuring the system software
8.3 P.02: Unit for temperature display
The system can display the room temperature in °C or °F.
1. Switch to configuration mode (chapter "Entering and exiting configuration
mode" on page 12).
✔ The display shows "P.01" and the
2. Press the
✔ The display shows "P.02" and the symbol lights up.
3. Press the
✔ The code for the current setting is displayed:
– 0: °C
– 1: °F
4. Use the
5. Press the
✔ The set value is saved and is then applied when the system is restarted.
✔ You are then returned to the menu and can select another menu item by
pressing the
14
or button to select the menu item P.02.
button to change the setting.
or button to select the desired temperature unit.
button to save the setting.
or button.
symbol flashes.
CoolAir
EN