Introduction; Statement Of Intended Use; Expected Service Life - Joerns Oxford Up Manuel D'utilisation

Les langues disponibles

English

1. Introduction

The Oxford Up is an assistive standing and transfer device, designed for moving a person over short

distances. This might be from bed to chair, chair to wheelchair or to and from a toilet/commode, for

example. The Up has a compact footprint, enabling effective use, even in confined spaces.

The packing consists of a strong, purpose built carton that is used for both export and domestic

markets to ensure the safe arrival of the product.

To properly maintain your product please refer to the maintenance schedule included in this

document. If you are at all unsure what your country's servicing requirements are, please check

with your authorised distributor and/or a local government agency.

The CE mark:

The Oxford Up is intended for use by an individual who has the ability to stand unassisted or

with minimal assistance. It will enable their transfer from one resting surface to another, such as

from a bed to a chair. It is an active product for users who can contribute effort to the standing

and transfer process. By encouraging user particpation, the Up is a valuable rehabilitation aid,

improving natural function and tone. The Up is designed for indoor use and for transfers on flat

surfaces, over short distances only.

Oxford Professional products are designed and tested for a minimum service life of ten (10)

years, subject to the use and maintenance procedures stated in this manual. Use, other than in

accordance with these instructions, may compromise service life.

The Oxford Up carries the CE mark and complies with the following EC

directives:

• Medical Device Directive MDR 2017/745

Oxford

Table des Matières