Adjusting The Temperature - Beurer ELLLE HTE 30 Mode D'emploi

Adjusting the temperature

The temperature can be adjusted
continuously.
• You can increase (+) or decrease (-) the
temperature using the temperature
controller [5].
We recommend the following temperature
settings:
Level Hair type
Low - Fine, fragile, coloured or
medium bleached hair
Medium - Normal and thick hair
high
Note
• The higher the selected temperature, the
more quickly you get the desired result.
16
Shaping hair
• Dry your hair completely before using the
curling iron.
• Your hair should be clean and free of styling
products.
• Comb your hair with a wide-toothed comb to
untangle it.
• Divide your hair into individual strands with
a width of about 2 cm. Hold the strands
taut.
• Press on the lever [4] to open the clip [3].
Shaping hair ends
• Place the hair strand ends between the
barrel [2] and the clip [3].
• Close the clip [3] to hold the hair strands in
place.
• You can shape the ends by twisting the
curling iron either outward or inward before
you pull it out over the ends.
• Do not remain at any one place for longer
than about 8 to 10 seconds. This way you
will obtain the best results without
overstraining or damaging your hair.
Shaping curls/waves
• Place the hair strand ends between the
barrel [2] and the clip [3].
• Close the clip [3] to hold the hair strands in
place.
• Wind the strands toward your head on the
curling iron.
• Leave the curling iron in your hair for 8 to 10
seconds to achieve the desired curling
results.