Temperature Setting - Beurer HT 55 Mode D'emploi

5. Set your desired temperature setting using the (+)
button [4] or the (-) button [5]. The current temper-
ature setting is shown on the LCD temperature
display [3]. The temperature can be permanently
set by pressing the ON/OFF button [6] twice. The
locked symbol
We recommend the following temperature
settings:
Note:
The curl styler has an automatic button lock
which switches on automatically after 30
seconds. You can only switch off the device if
the keylock is deactivated. To deactivate the
keylock, press the ON/OFF button [6] twice
again. The locked symbol
6. Separate your hair into individual sections with a
width of approx. two centimetres. Hold the sec-
tions taut at the tips.
7. Carefully guide the hair between the two heating
rods [2]. Make sure that you leave enough space
between your hand and the heating rods [2].
appears on the display.
goes out.
Temperature
setting
100°C to 140°C
140°C to 160°C Normal hair
160°C to 200°C
22
Hair type
Fine, brittle,
coloured or
bleached hair
Thick and resist-
ant hair