Replacing Nylon Line - Stihl FSA 65 Notice D'emploi

English
Storing the battery
N Take the battery out of the power
tool or the charger.
N Store in a dry, locked location. Keep
it out of the reach of children and
other unauthorized persons and
protected from contamination.
N Do not store spare batteries unused
– use in rotation.
To ensure maximum battery life:
N
Store at a temperature between
+ 10°C and + 20°C.
N Store with a charge of about 30%.
Storing the charger
N Remove the battery.
N Disconnect the plug from the wall
outlet.
N
Store the charger in a dry, locked
location. Keep it out of the reach of
children and other unauthorized
persons and protected from
contamination.
16

Replacing Nylon Line

STIHL AutoCut C 4-2
Always check the mowing head for signs
of wear before replacing the nylon line.
If there are signs of serious wear,
replace the complete mowing
head.
Preparations
N Switch off the trimmer.
N Move the retaining latch to ƒ.
N Remove the battery
N Put the power tool on the ground
with the mowing head facing up.
Removing the mowing head and
remaining nylon line
In normal operation, the supply of nylon
line in the head is used up almost
completely.
N Hold the mowing head steady and
rotate the cap (1) counterclockwise
until it can be removed.
N Remove the mowing head.
N Pull the spool (2) out of the mowing
head (3) and remove the remaining
line.
FSA 65, FSA 85
1
2
3