Adjusting The Loop Handle; Mounting The Deflector - Stihl FSA 65 Notice D'emploi

Adjusting the Loop Handle

Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
1
N Loosen the star knob (1) on the
handle.
N
Turn the handle to the vertical
position.
FSA 65, FSA 85
A
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 10 cm
N Slide the handle to the required
position.
N Tighten down the star knob so that
the handle cannot be rotated on the
shaft.

Mounting the Deflector

1
N Position your trimmer so that the
mowing head (1) faces up.
The motor housing has guide slots
(arrows) to correctly locate the deflector.
3
3
N Push the deflector (2) into the guide
slots as far as stop.
N Insert the screws (3) and tighten
them down firmly.
English
2
9