Operation - Ammann AVH 7010 Instructions De Service

3. Operation

3.6 Operation
a
2
MIN
MAX
•
Set the speed lever (1) in full load direction.
•
Adjust the drive direction and speed at the drive lever (2).
To avoid coupling damages, take care that the
motor speed of the machines with centrifugal
clutches are clearly above or resp. below the
Attention
starting speed (about 1000 rpm).
The motor has to cut-off by long working breaks;
long idle-runnings can take to great motor
damages.
•
Guide and steer the machine at the tow bar; the operator
should go alongside the tow bar.
For compaction of paving stones, it is recommended to
use Vulkollan plates and protective brackets (special
accessories) to prevent damages to the compaction
Important
material and to the machine.
b
STOP 1
B6299202.cdr
32