Scope Of Delivery; Intended Use; Technical Description - Dometic WAECO SinePower MSP 162 Instructions De Montage Et De Service

Scope of delivery

3 Scope of delivery
Sine wave inverter
4 holders
Instruction Manual
4

Intended use

Caution
a
This device is exclusively intended for vehicle use.
The SinePower inverters are used to convert a direct current of 12 V or 24 V
into a 230 V AC supply of 50 Hz.
12 V:
SinePower MSP 162, item no. MSP160-012, or
SinePower MSP 352, item no. MSP350-012
24 V:
SinePower MSP 164, item no. MSP160-024, or
SinePower MSP 354, item no. MSP350-024
5

Technical description

The inverter can be operated wherever there is a 12 V DC vehicle socket
(MSP 162 or MSP 352) and a 24 V DC vehicle socket (MSP 164 or
MSP 354).
The devices are additionally cooled with a load and temperature-dependent
fan (fig. 2 5, page 4).
The maximum constant output for the devices is as follows:
For inverters MSP 162 and MSP 164 150 W
For inverters MSP 352 and MSP 354 350 W
Never connect devices that have a higher power requirement.
The inverter can be switched on and off using the switch directly on the de-
vice or using an external switch.
24
SinePower
EN